NXE 5000mAh 2S 7.4V 100C Shorty Hard Case LiPo Battery – 5mm Bullet / Deans – 5000HC1002SDEAN

The NXE 5000mAh 2S 7.4V 100C Shorty Hard Case LiPo Battery is a high-performance battery designed for 1/10 scale competition and performance RC cars where high current delivery, compact dimensions and reduced weight are important.

Featuring a substantial 5000mAh capacity, powerful 100C discharge rating and compact shorty hard-case design, this pack is ideal for racers looking to reduce battery weight and improve weight distribution without sacrificing useful runtime.

High-Performance 100C Output

The battery uses a standard 2S LiPo configuration, providing 7.4V nominal voltage and reaching 8.4V when fully charged.

Its 5000mAh capacity provides excellent runtime for a shorty-format battery, while the 100C discharge rating is designed to deliver the high current demanded by powerful competition brushless systems.

The pack also features heavy-duty 10AWG wiring, helping provide efficient current delivery between the battery and ESC.

Compact Shorty Hard Case

One of the major advantages of the 5000HC1002SDEAN is its shorty configuration. At approximately 96 × 47 × 25mm, it is considerably shorter than a conventional full-length 2S stick pack.

The shorter battery allows racers greater flexibility when positioning electronics and adjusting vehicle weight distribution. Depending on the chassis, moving the shorty battery forwards or backwards can also be used as part of the car's overall balance and handling setup.

The rigid hard case provides additional protection for the LiPo cells against impacts, vibration and debris encountered in surface RC applications.

5mm Bullet Connection with Deans Lead

This pack is designed around 5mm battery terminals and is supplied/configured with a Deans / T-Plug connection. One detailed Australian listing specifically describes it as a 5mm bullet pack with Deans adaptor.

This arrangement is particularly useful in competition RC applications, where removable battery leads provide a clean installation while allowing leads to be changed if required.

Ideal for Performance RC Cars

The compact dimensions and high discharge capability make this battery particularly well suited to compatible 1/10 scale electric RC cars, including touring cars, buggies, stadium trucks and other performance-oriented vehicles that accept a shorty-format battery.

As battery dimensions vary between chassis designs, the battery compartment should always be checked before installation.

Features

• 5000mAh capacity
• 2S / 7.4V LiPo configuration
• High-performance 100C discharge rating
• Compact shorty battery format
• Protective hard-case construction
• 5mm battery connection
• Deans / T-Plug connection
• JST-XH balance connection
• Heavy-duty 10AWG wiring
• Compact and lightweight design
• Ideal for compatible 1/10 scale RC cars
• Suitable for competition and high-performance applications
• Shorty format allows greater flexibility with vehicle weight distribution
• Standard LiPo chemistry

Specifications

• Brand: NXE Batteries
• Part Number: 5000HC1002SDEAN
• Battery Chemistry: LiPo
• Capacity: 5000mAh
• Voltage: 7.4V
• Fully Charged Voltage: 8.4V
• Cell Count: 2S
• Discharge Rating: 100C
• Case Type: Hard Case
• Battery Format: Shorty
• Battery Connection: 5mm Bullet
• Supplied Connector: Deans / T-Plug
• Balance Connector: JST-XH
• Main Wire: 10AWG
• Length: Approx. 96mm
• Width: Approx. 47mm
• Height: Approx. 25mm
• Weight: Approx. 209g
• Application: RC Car / Surface
• Barcode / EAN: 6925780561425

What's Included

• 1 x NXE 5000mAh 2S 7.4V 100C Shorty Hard Case LiPo Battery
• Deans / T-Plug connection lead

Please Note

This is a standard 2S 7.4V LiPo battery, not a LiHV battery. A suitable LiPo balance charger capable of charging 2S batteries is required.

The battery uses the shorty hard-case format, so always check your vehicle's battery tray and mounting system for compatibility before purchase.