NXE 3300mAh 3S 11.1V 30C Hard Case LiPo Battery with Deans – 3300HC303SDEAN

The NXE 3300mAh 3S 11.1V 30C Hard Case LiPo Battery is a durable power pack designed primarily for RC cars, trucks and other surface vehicles requiring a 3S LiPo battery.

Combining a 3300mAh capacity, 30C discharge rating and protective hard case, it provides a practical balance of performance, runtime and durability. The battery comes factory fitted with a Deans / T-Plug connector and JST-XH balance lead, making it ready for use with compatible RC models and LiPo chargers.

3S 11.1V Performance

The 3300HC303SDEAN uses a 3S LiPo configuration, providing a nominal voltage of 11.1V and reaching 12.6V when fully charged.

Its 3300mAh capacity provides a useful combination of runtime and manageable battery weight, while the 30C discharge rating equates to a theoretical continuous output of approximately 99A (3.3Ah × 30C).

This makes it suitable for compatible brushed and brushless RC systems designed to operate on 3S power.

Protective Hard Case

The LiPo cells are enclosed in a rigid hard case, providing additional protection against impacts, vibration and debris.

This makes the battery particularly suitable for surface RC applications, where batteries are subjected to considerably more physical abuse than in many aircraft applications. NXE specifically categorises this pack for RC car use.

Deans / T-Plug Connector

The battery comes factory fitted with a Deans / T-Plug main power connector, allowing direct connection to compatible ESCs without requiring an adapter.

A separate JST-XH balance connector allows each of the three cells to be individually monitored and balanced during charging. The main battery leads are 12AWG.

Standard RC Car Battery Format

At approximately 138 × 46.5 × 25mm, the battery uses a conventional rectangular hard-case format suitable for many RC battery compartments.

The dimensions are particularly useful for vehicles where a standard-width stick-style hard case is required.

Features

• 3300mAh capacity
• 3S / 11.1V LiPo configuration
• 30C discharge rating
• Protective hard case construction
• Factory-fitted Deans / T-Plug connector
• JST-XH balance connector
• 12AWG main power wiring
• Standard rectangular RC battery format
• Suitable for compatible RC cars and trucks
• Suitable for compatible brushed and brushless power systems
• Good balance of capacity, performance and durability
• Standard LiPo chemistry

Specifications

• Brand: NXE Batteries
• Part Number: 3300HC303SDEAN
• Battery Chemistry: LiPo
• Capacity: 3300mAh
• Voltage: 11.1V
• Fully Charged Voltage: 12.6V
• Cell Count: 3S
• Discharge Rating: 30C
• Case Type: Hard Case
• Configuration: Flat
• Main Connector: Deans / T-Plug
• Balance Connector: JST-XH
• Main Wire Gauge: 12AWG
• Length: 138mm
• Width: 46.5mm
• Height: 25mm
• Weight: Approx. 276–302g
• Application: RC Car / Surface
• ROAR Approved: No
• Barcode / EAN: 6925780561463

What's Included

• 1 x NXE 3300mAh 3S 11.1V 30C Hard Case LiPo Battery with Deans / T-Plug

Please Note

This is a standard 3S 11.1V LiPo battery, not a LiHV battery. A suitable LiPo balance charger capable of charging 3S batteries is required.

Always confirm that your vehicle's ESC and motor are rated for 3S LiPo operation, as using 3S in a vehicle designed only for 2S can damage the electronics or drivetrain.