Gens Ace 3000mAh 7.4V 2S LiPo Transmitter Battery with JST Plug – GEA30002STXJ

The Gens Ace 3000mAh 7.4V 2S LiPo Transmitter Battery provides rechargeable power for compatible RC radios. Combining a 3000mAh capacity with a slim soft-case design, this pack is a practical replacement or spare for transmitters that accept a standard two-cell LiPo battery.

Its narrow profile suits compatible battery compartments where space is limited, while the fitted JST power connector and separate balance lead provide convenient connections for installation and charging.

3000mAh Capacity for Transmitter Use

The 3000mAh capacity provides a useful power reserve for flying, driving and model setup sessions. Actual operating time depends on your transmitter’s power consumption, screen settings, RF module and connected accessories.

A rechargeable transmitter pack makes it convenient to prepare your radio alongside the rest of your RC equipment before heading to the track or flying field.

7.4V Two-Cell LiPo Configuration

The battery uses a 2S1P configuration, delivering 7.4V nominal voltage and 8.4V when fully charged. Your transmitter must support the full voltage range of a standard 2S LiPo pack.

Where available, select the correct battery type and low-voltage alarm settings according to your radio’s instructions.

Slim Soft-Case Construction

Measuring approximately 98 × 28 × 18mm, this pack offers a narrow shape for suitable transmitter battery compartments. Its approximately 104g weight helps keep the installation compact.

Allow additional clearance for the leads and connectors when checking fit. Secure the battery to prevent movement and route the wiring so the compartment cover closes without pinching it.

JST Power Connector

The fitted JST connector suits compatible transmitter battery inputs. Confirm the connector shape and polarity before installation, as different JST connector families are not interchangeable.

Separate Balance Connection

The JST-XH three-pin balance lead allows a suitable charger to monitor the individual cells during balance charging. Use it together with the main charging lead and a charger supporting standard 2S LiPo batteries.

Key Features

• 3000mAh capacity for compatible transmitter applications.

• 7.4V nominal voltage with a 2S1P configuration.

• Slim soft-case design.

• Fitted JST main power connector.

• JST-XH three-pin balance lead.

• Practical replacement or spare transmitter battery.

Specifications

Transmitter Compatibility

Suitable for transmitters that accept 2S LiPo batteries, provide sufficient compartment space and use a matching power connection. Confirm your particular radio’s voltage requirements, battery settings and connector arrangement before fitting.

Package Contents

• 1 × Gens Ace 3000mAh 7.4V 2S LiPo transmitter battery with fitted power and balance leads.

Required for Use

• Compatible RC transmitter.

• Balance charger supporting standard 2S LiPo batteries.

• Suitable charging lead for the battery’s JST connector.

Charging Note: Use the charger’s standard 2S LiPo programme and follow the battery’s supplied instructions. Use in-radio charging only where the transmitter manufacturer explicitly supports this battery type.