A wide curved cant rail with a radius of 317mm, a curve angle of 45°, and a width of 37mm. It has a cant where the rail on the outside of the curve is higher than the inside, so you can enjoy the train leaning inward just like the real thing.

Features

• Ballast and sleepers are painted for a beautiful appearance
• PC sleepers are expressed
• Rails are joined together with nails for easy and reliable connection
• Connection compatible with conventional TOMIX rails
• Handrails, side walls, and fences (sold separately) can be attached to the side of the rail
• Compatible with single-track piers by attaching the separately sold single-track pier base to the bottom
• Can be used as a double-track rail by connecting the separately sold C280-45-WP to the inside, or by connecting the separately sold C354-45-WP to the outside . When used as a double-track rail, attach the coupling for the wide rail cant section to the underside to support double-track elevated piers.Power is supplied by attaching the feeder for wide rails and slab rails to the underside (slab rail feeders can also be installed, conventional feeders can be installed) (Not available)
• Sensors for wide rails and slab rails can be installed by user additional machining (sensors for slab rails and one-touch installation sensors cannot be installed)
• Compatible with various overhead line pole installations
• Cant inclination angle is approximately 4 degrees

• Wide PC curve rail C317-45-WP(F)
• Runner parts: Wide rail joint