The RPM Low Center of Gravity Front Bulkhead for Traxxas Slash 4×4, Rustler 4×4, Jato 4×4 and 1/10th scale Rally solves key customer-reported issues with smart design. We split it into two pieces, making maintenance fast and easy. Remove the front end without touching the bellcranks, just take out the two tie rod screws at the spindle block, and the steering stays with the chassis.

RPM added side dirt shields that blend with the chassis to protect the steering servo and bellcrank from debris. We also sealed the bottom of the bulkhead to keep dirt out from below.

Molded from bulletproof engineering-grade nylon, each bulkhead comes with RPM’s limited lifetime breakage warranty, giving you stress-free, long-lasting performance.

Tech Notes: RPM bulkheads for the LCG Slash 4×4, Rustler 4×4, Jato 4×4 & 1/10th scale Rally (ST versions as well) replace stock Traxxas #7430 & #7430X. Fits vehicles equipped with the Traxxas #7422 or #7422A chassis. These bulkheads will not work on the standard chassis version of either the Slash 4×4 or Stampede 4×4 nor will it fit the #6723R Rustler 4×4 chassis (caution: does NOT replace Traxxas #7430R).