NXE 8000mAh 2S 7.6V 100C LiHV Hard Case Battery with Deans – 8000HC1002SDEAN

The NXE 8000mAh 2S 7.6V 100C LiHV Hard Case Battery is a high-capacity performance battery designed for RC cars requiring strong power delivery, long runtime and the additional performance available from high-voltage LiHV chemistry.

With a massive 8000mAh capacity, 100C discharge rating, durable hard-case construction and 5mm bullet connections with a Deans / T-Plug lead, this pack is an excellent choice for demanding 1/10 scale RC car applications where both performance and runtime are important.

High-Voltage 2S LiHV Performance

Unlike a conventional 2S LiPo battery with a nominal voltage of 7.4V, this NXE pack uses LiHV (High Voltage LiPo) chemistry and has a nominal voltage of 7.6V.

When charged using a compatible LiHV charger, a 2S LiHV battery can be charged to 8.7V (4.35V per cell). This provides slightly higher operating voltage than a conventional 2S LiPo pack and can provide additional performance in compatible RC systems.

Massive 8000mAh Capacity

The large 8000mAh capacity is one of the standout features of this battery.

The additional capacity provides excellent potential runtime compared with lower-capacity 2S packs, making it particularly suitable for RC applications where longer driving sessions are desired.

Despite its large capacity, the battery retains the familiar full-size stick-pack footprint used by many 1/10 scale RC cars. Published dimensions are approximately 138–139 × 46–47 × 25mm.

100C Discharge Rating

A high 100C discharge rating is designed to provide the strong current delivery required by powerful brushless RC systems.

The combination of 8000mAh capacity and a 100C rating makes this pack particularly attractive for performance RC cars where acceleration, consistent power delivery and extended runtime are priorities.

Durable Hard Case Construction

The LiHV cells are enclosed within a rigid hard case, providing additional protection against impacts, vibration and debris encountered during normal RC car use.

Its approximately 25mm height also keeps the pack relatively low-profile considering its substantial 8000mAh capacity.

5mm Bullet Connections with Deans Lead

The battery uses 5mm bullet terminals rather than permanently attached main power leads.

A connection lead is supplied to connect the battery to a Deans / T-Plug equipped ESC, providing a neat installation while allowing the battery lead to be replaced separately if required.

Features

• High-performance 2S LiHV battery
• 7.6V nominal voltage
• Massive 8000mAh capacity
• High 100C discharge rating
• Durable hard-case construction
• Standard full-size stick-pack format
• 5mm bullet battery terminals
• Deans / T-Plug connection lead
• JST-XH balance connection
• Designed for RC car and surface applications
• High capacity for extended potential runtime
• Strong current delivery for demanding brushless systems
• Low-profile 25mm hard case
• Ideal for compatible high-performance 1/10 scale RC cars

Specifications

• Brand: NXE Batteries
• Part Number: 8000HC1002SDEAN
• Battery Chemistry: LiHV / High Voltage LiPo
• Capacity: 8000mAh
• Nominal Voltage: 7.6V
• Cell Count: 2S
• Maximum LiHV Charge Voltage: 8.7V
• Discharge Rating: 100C
• Case Type: Hard Case
• Battery Connection: 5mm Bullet
• Supplied ESC Connector: Deans / T-Plug
• Balance Connector: JST-XH
• Length: Approx. 138mm
• Width: Approx. 46mm
• Height: Approx. 25mm
• Battery Weight: Approx. 310g
• Weight with Lead: Approx. 338g
• Application: RC Car / Surface
• Barcode / EAN: 6925780561418

What's Included

• 1 x NXE 8000mAh 2S 7.6V 100C LiHV Hard Case Battery
• 1 x 5mm Bullet to Deans / T-Plug connection lead

Please Note

This battery is a LiHV (High Voltage LiPo) pack rather than a conventional 7.4V 2S LiPo. To charge it to its full 8.7V, a charger with a dedicated LiHV charging mode is required.

Always check that your vehicle's electronics are suitable for the higher fully charged voltage of a LiHV battery. Also confirm that the battery compartment can accommodate the approximately 138 × 46 × 25mm pack.