The four-wheel drive chassis and drift-specific tires are pre-installed, so you can enjoy drifting in a small space!
The MINI-Z AWD series comes with the Syncro KT-531P transmitter.

We want more drivers to experience the driving performance of the MINI-Z AWD. The MINI-Z AWD Ready Set was born to make that wish come true. The MA-020 series chassis features a VCS (Variable Camber Suspension) on the front that optimizes camber change with stroke, and a revised steering control program. Compatible with a dedicated gyro (sold separately: part numbers MZW446/MZW711), it is equipped with a dedicated space and gyro adjustment volume. The effectiveness of the gyro can be adjusted on the chassis alone, and posture changes are reflected in the steering correction, providing beginners with peace of mind while experts can demonstrate their true abilities. It also features a full bearing specification with 14 bearings. This fully-equipped chassis is highly efficient and durable, and is available at an affordable price. The set is a Ready Set that includes the MINI-Z's scale-like body and the 2.4GHz Syncro KT-531P radio control that does not require band management. Drift tires are fitted as standard, so you can enjoy thrilling drifting immediately after simply setting up the batteries. Of course, it is compatible with many of the ASC bodies that are assets of the MINI-Z (separate parts may be required depending on the car model). Experience the driving experience that can only be experienced with an AWD chassis with the MINI-Z AWD.

*The separately sold LED light unit set (No. MZW429R) cannot be installed on the Mazda Savanna RX-7 FC3S Aero Version with Carbon Bonnet.

• Renewed version of the AWD sports chassis based on the MA-020 series chassis.
• Special circuit board with revised steering control program.
• Equipped with a volume that allows the effectiveness of the gyro to be adjusted on the chassis alone.
• Drift tires included as standard.
• Ready set that can run immediately after setting the batteries.
• Uses 2.4GHz Syncro KT-531P transmitter that does not require band management.
• Factory-assembled body with the same finish as the display model.
• Uses "VCS" front suspension that brings out camber change with the suspension stroke.
• No tools are required, and the coil spring of the front suspension can be easily replaced.
• A wide range of optional parts can be installed.
• Note) The optional ICS cannot be used. In addition, since it is designed exclusively for the KT-531P transmitter, it is not compatible with the KT-18, KT19, EX-5UR ASF, EX-6, and EX-6R transmitters. In addition, only the dedicated gyro unit (sold separately: part number MZW446/MZW711) is compatible.
• Includes a light pod set that can be modified and installed on the body by the customer .