Futaba 10PX Features:

• Full colour touch screen LCD
• Equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system.
• Up to 10 channels can be operated by using the S.BUS2 system together.
• By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini € “ Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately.
• Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
• Model memory for 40 models
• Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
• A paddle switch near the wheel, a 3-position switch on the grip, and a bottom switch on the bottom are equipped to support multiple channels and functions.
• The optional LT2F2000B Lipo battery can be used as the transmitter power supply. The running time is extended.
• Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently.
• Smooth cornering is possible by the independent left and right steering servo setting.
• 4WS mixing for crawlers and other 4WS type, this function can be used with crawlers and other 4-wheel steering type vehicles.
• Dual ESCs mixing for crawlers
• Gyro mixing
• Tank mixing
• CPS mixing
• S.BUS servo
• Throttle speed
• Steering speed
• Non-telemetry LED
• Dial select function
• Switch select function, this function assigns functions to 10 switches. The operating direction can also be set.
• Wheel AND; Trigger position can be changed
• Rubber Grip
• Trim/dial lock functions
• Left-handed support
• Vibrator built into the grip
• USB Port, the transmitter can be used as a game controller by connecting it to a computer with a USB cable. (Some games cannot be used.)

Your 10PX includes the following components:

• Futaba 10PX Transmitter
• 2X R404SBS Receiver
• LiFe Battery € “ FT2F1700BV2 (6.6 V)
• Dry Battery Holder
• Wheel offset adapter two size (APA)APA Mounting screws *Spare screws are also included
• Wheel adapter 32 deg
• Wheel Angle spacer 5 deg
• Large diameter steering wheel
• Trigger guard (Lx1/Rx1)
• Grip rubber x1
• Blind paddle x2
• Hex wrench
• Short manual