1:12 TOYOTA FJ45 Pickup Truck

To create this officially licensed RC version of the TOYOTA FJ45, FMS super-finely restores the real car, and the degree of restoration is no less than that of the static model.

The hood hinge is the same living hinge as the real car, and it looks slim and beautiful on the 1/12 model car. The motor, steering servo and 2-in-1 integrated ESC / receiver are all hidden under the hood, and the battery is also here, for easy installation. The doors on both sides can be opened, the front windshield can be folded forward, if the roof is removed at the same time, it can be transformed into a convertible shape. If the screws on the slender hinges of the doors are removed, the doors can be removed, showing a more simple and wild performance. At this time, the cockpit is more transparent, the steering linkage action of steering wheel can be seen at a glance, and it is also more convenient to carry 1/12 flexible figures.

The two-speed gearbox provides powerful torque. Metal gears carry power, with bearings all over the whole vehicle, allow it moving forward slowly even if it is fully loaded with gravel. The TOYOTA logo on the rear of the car restores the stereoscopic stamping effect of the steel plate of the real car. The tailgate can be opened to load extra-long "cargo". There are two sets of taillights on the left and right of the tailgate, each set includes a turn signal, a brake light, and a reversing light. With the input of the light control button on the transmitter, the linkage effect is consistent with the driving action. The front headlights have linkage effect of far and near beam and turn signal.

Features

• Ready To Run Model
• Two Speed Transmission
• Ball Bearings Full Set
• Polystyrene Body
• Nice Painted Body
• Hood Can Be Opened
• Both Side Doors Can Be Opened
• Tailgate Can Be Opened
• Super Exquisite Interior
• Steel C-Channel Frame
• Leaf Spring Suspension
• Remote Control Lighting System
• 180 Motor

Contents

• 1 x 1:12 TOYOTA FJ45 RTR
• 1 x 2.4G Transmitter
• 1 x 2-in-1 Receiver (installed)
• 1 x 180 Brushed Motor (installed)
• 1 x 9g Plastic Digital Servo (installed)
• 1 x 2S 7.4V 380mAh Battery
• 1 x USB Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Requires

• 4 x AAA Batteries for Transmitter