The stx2 2-channel radio system offers many features of higher-end 2. 4ghz radio systems like throttle/steering reversing, throttle/steering travel adjust and; throttle limiting.

• built-in 3-position throttle limiter
• steering and; throttle rate and; trim adjustments with throttle and steering reversing
• fhss 2. 4ghz protocol offers extended range and interference-free performance
• aa batteries included

The spektrum esc/receiver is an all in one unit featuring an ec3 battery connector, a convenient on- off switch and it's water resistant for peace of mind when water splashes on your electronics. warning: this product is only compatible with nimh batteries. Do not use a lipo battery or fire causing serious injury or damage to property may occur.

Delivering an even balance of speed and technical adventuring, the dynamite tazer 380 37t motor features a worry-free design with enlarged cooling ports for extended periods of use. The motor is paired with a 15t pinion and 60t spur gear for extra speed!

• 37t, 380 size motor
• waterproof

Steering is powered by a spektrum high torque micro servo, featuring a metal gear train to help withstand rough offroad conditions.

• 4. 8v torque: 34. 9 oz-in (2. 5 kg-cm)
• 6. 0v torque: 41. 8 oz-in (3. 0 kg-cm)
• 4. 8v speed: 0. 09 sec/60 °
• 6. 0v speed: 0. 08 sec/60 °

The included dynamite 1300mah nimh battery pack features a convenient ec3 connector and a 1300mah charge capacity.

• type: nimh
• connector type: ec3
• capacity: 1300mah
• cell size: 2/3a
• voltage: 7. 2v
• configuration: flat

The dynamite 6-cell nimh usb battery charger is small, compact, and easy to operate. Simply plug into a usb power source and plug the nimh battery into the charger and you're charging. note: for use with 6-cell nimh batteries only.

To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yielding ample terrain clearance a new axle was designed, the ar18. Features include a compact two-piece design, captured pinion gear, and three-linked rear suspension with integrated sway-bar like support design for improved handling

Rear suspension features:

• 8mm axle with 12mm hex adapter
• open diff
• 61mm-90mm 7mm diameter shocks with 3mm shocks shafts
• multiple shock mounting positions

The threaded shock bodies hold a single coilover spring. They are oil filled and allow you to tune the dampening rate.

• 46mm-63mm 7mm diameter front shocks
• 61mm-90mm 7mm diameter rear shocks
• 3mm shock shafts

The yeti jr. Features a three-linked rear suspension design with integrated sway-bar like support for improved handling. The rear axle has upper and lower mounting points for the trailing arm, allowing you to fine tune your suspension setup.

The yeti jr. Is equipped with an independent front suspension (ifs) system to help maintain high-speed stability when running through a diverse range of terrain. The ifs system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. The stability that the ifs front end provides is paramount for off road racing

Front suspension features:

• machined aluminium cvd's
• 8mm axle with 12mm hex adapter
• open diff
• 2. 50mm hingepins
• 46mm-63mm 7mm diameter shocks with 3mm shocks shafts
• multiple shock mounting positions

No micro gearing here, instead the drivetrain features 48p gears, which is not only a robust design but also expands the number of possible gearing configurations. The spur gear is mated to a 15t metal pinion gear for optimal gearing.

Adjusting gear mesh to accommodate different sized pinion or spur gears has never been easier with the help of a cam style motor mount design. The front top plate secures the cam motor plate in place and all the screws thread down into the chassis, eliminating the need for extra-long hex drivers in order to secure the motor and gear mesh.

Just because the yeti jr. Is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead, the yeti jr. Drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.

Maxxis bighorn 2. 0 tires feature a non-directional tread pattern that is suitable for use in a wide variety of conditions such as hard packed dirt, soft terrain, and traversing scale trails in your backyard!

The stylish and sturdy can-am wheels feature a standard sized 12mm hex for a strong, durable fit.